King Long at NADA Auto Show 2025
Discover our premium King Long Vans, highlighting comfort, reliability, and modern design on the show.
Bringing Nepal a greener and more comfortable travel experience.
Water contamination is one of the most common causes of fuel system failure in diesel engines. A Fuel Water Separator Filter is designed to remove water and impurities from the fuel before it reaches the injection system. This simple but crucial component helps extend engine life, improve combustion efficiency, and prevent costly repairs.
A Fuel Water Separator is a two-stage filtration device that separates water droplets and solid particles from diesel fuel. It typically consists of a primary filter that traps large contaminants and a secondary filter that captures fine particles while allowing only clean fuel to pass through.
The separator uses gravity and filtration principles. Since water is denser than diesel, it naturally settles at the bottom of the filter. A drain valve is often included to remove accumulated water manually or automatically.
| Stage | Process | Function |
|---|---|---|
| Primary Filtration | Removes large particles (rust, dirt, sludge) | Prevents early clogging of fine filters |
| Water Separation | Uses centrifugal or coalescing media | Separates and collects water droplets |
| Final Filtration | Removes fine contaminants (1–5 microns) | Delivers clean diesel to engine injectors |
Regular fuel filter replacement prevents these issues. It’s recommended to inspect and replace your diesel water separator filter every 10,000–20,000 km or as advised by the manufacturer.
Below are some common Fuel Water Separator Cross Reference examples for reference:
| Brand | Part Number | Equivalent Filter |
|---|---|---|
| Fleetguard | FS1000 | Baldwin BF7587 / Donaldson P550588 |
| Parker Racor | S3201T | Hifi SN70335 / Mann WK940/7 |
| Donaldson | P551000 | Hengst H111WK / SF Schupp SL10347 |
We manufacture a wide range of fuel water separator filters designed for construction machinery, generators, and heavy-duty diesel engines. Our filters meet or exceed OEM specifications, providing excellent water separation efficiency and long service life. OEM and ODM cooperation are always welcome.
WhatsApp/Wechat: +86 18965520297 | +86 18144082725
Email: Sales@filters-king.com
Website: www.filters-king.com
Protect your engine from water contamination with high-quality Fuel Water Separator Filters from CHINA EVERLASTING PARTS CO., LIMITED!
Choosing the right hydraulic filter is critical to protecting your equipment, extending service life, and preventing costly breakdowns. This guide will help you understand hydraulic filter types, selection standards, and how to use hydraulic filter cross reference tools to find the perfect match for your system.
A hydraulic filter removes contaminants from hydraulic oil — including dust, metal particles, and sludge. Clean hydraulic oil ensures smooth system operation, prevents pump damage, and maintains optimal efficiency. Without proper filtration, contamination can lead to premature wear and system failure.
There are several hydraulic filter types used in different parts of the system. Below is an overview:
| Filter Type | Location | Function |
|---|---|---|
| Suction Filter | Before the pump | Prevents large debris from entering the pump |
| Pressure Filter | After the pump | Protects system components from fine contamination |
| Return Line Filter | Before the reservoir | Cleans oil returning to the tank |
| Off-Line (Bypass) Filter | Separate filtration circuit | Provides continuous cleaning without stopping the system |
When choosing a filter, consider the following factors:
Here are some common hydraulic filter cross reference examples you can refer to when selecting your filter:
| Brand | Part Number | Equivalent Filter |
|---|---|---|
| Donaldson | P566689 | Hydac 0060D010BH/HC |
| Parker | PR3066Q | Stauff SE014H10B |
| Rexroth | R928017119 | Mahle Knecht 7889306 |
| Baldwin | PT9302-MPG | SF Schupp HY13018 |
As a professional hydraulic filter manufacturer, we supply a wide range of high-quality filters including hydraulic, fuel, oil, and air filters. Our products are widely compatible with international brands, ensuring easy cross reference replacement and stable performance. We also support OEM & ODM service for global distributors and wholesalers.
WhatsApp/Wechat: +86 18965520297 | +86 18144082725
Email: Sales@filters-king.com
Website: www.filters-king.com
When replacing hydraulic filters, finding the exact match can be challenging due to multiple brands, part numbers, and specifications. This is where hydraulic filter cross reference becomes essential. Using cross references, you can quickly find compatible filters, reduce downtime, and ensure your hydraulic system continues to operate reliably.
A hydraulic filter cross reference is a guide that shows which filters from different brands are compatible with each other. It helps you identify OEM-equivalent filters from other manufacturers without compromising system performance.
The table below lists some common cross references among popular brands:
| Brand A | Part Number | Equivalent Brand / Part |
|---|---|---|
| Baldwin | PT9302-MPG | SF Schupp HY13018 / Hydac 0060D010BH/HC |
| Donaldson | P566689 | Parker PR3066 / MP Filtri MP9202 |
| Rexroth | R928017119 | Mahle Knecht 7889306 |
| Wix | D34B200SV | D82E10HV / Hifi SH75194 |
CHINA EVERLASTING PARTS CO., LIMITED is a professional manufacturer of high-quality filters, offering hydraulic, fuel, oil, and air filters. We supply OEM-equivalent hydraulic filters compatible with international brands. Our team provides technical guidance for cross-referencing and ensures reliable performance for your equipment.
WhatsApp/Wechat: +86 18965520297 | +86 18144082725
Email: Sales@filters-king.com
Website: www.filters-king.com
Use hydraulic filter cross reference tables wisely and keep your hydraulic system running at peak performance!
The hydraulic filter is essential for protecting your equipment from dirt and metal particles. Regular replacement helps keep your hydraulic system clean, efficient, and long-lasting.
Replacement frequency depends on the equipment type and working environment:
Replace your filter if you notice reduced performance, increased noise, or high pressure warnings.
Consider filtration rating, flow rate, pressure range, and cross-reference compatibility. Use only high-quality filters for reliable performance.
We supply high-quality hydraulic filters for brands like Hydac, Parker, Donaldson, Mahle, Rexroth, Pall, MP Filtri, Baldwin, and Stauff. Our filters offer long service life, high dirt-holding capacity, and low pressure drop.
CHINA EVERLASTING PARTS CO., LIMITED
WhatsApp/Wechat: +86 18965520297 | +86 18144082725
Email: Sales@filters-king.com
Driving a Greener Future at 4,200m!
On this #WorldEVDay, we’re showcasing how King Long’s pure electric buses continue to excel in the toughest environments. In Peru, the first pure electric commuter fleet is operating in mining sites at 4,200 meters.
 |
 |
A steering knuckle is a crucial part of a vehicle's suspension and steering system. It connects the wheel hub assembly to the suspension and steering linkages, supporting the wheel's vertical load while allowing it to pivot for steering.
Essentially, when you turn the steering wheel, the steering knuckle enables the wheels to change direction by pivoting on upper and lower pivot points. It plays a vital role in vehicle handling, stability, and safety by directly affecting how the car responds to steering inputs. The component is found in both front and rear suspensions, especially in modern vehicles with independent suspension systems.
The steering knuckle is a critical component in your vehicle's suspension system that connects the wheel hub to the suspension components. It acts as the base onto which various steering and suspension parts are mounted, including:
#Struts or shock absorbers
#Brake components
Steering knuckles are typically made of cast iron or aluminum and facilitate the pivot point for wheel rotation, enabling steering control while maintaining vehicle stability.
Common Symptoms of a Bad Steering Knuckle
Abnormal Tire Wear
Uneven or irregular tire wear, particularly on one front tire, often heavier toward the inner or outer edge. This occurs because a damaged knuckle throws off wheel alignment.
Noise and Vibration
Unusual sounds (grinding, clicking, clunking) or vibrations felt through the steering wheel, especially when turning or going around corners.
Vehicle Pulling
The vehicle pulls to one side when driving straight, requiring constant steering correction. This happens when the knuckle changes the wheel's road contact angle.
Steering Difficulties
Steering wheel feels stiff, binds, or is difficult to turn. This indicates the knuckle may be restricting smooth movement of steering linkages.
Additional Signs to Watch For:
Steering wheel doesn't return to center after turning
Visible grease leaks around the knuckle area
Loose suspension components or frequent bolt loosening
Brake performance issues like vibration during braking
King Long at Busworld 2025
A brand-new chapter begins!
King Long steps onto the global stage with confidence and passion — showcasing the power of Chinese smart manufacturing.
With technology and innovation, we connect with the world and shine together.
Witness the brilliance — King Long, redefining the future of mobility!
Hydraulic systems power everything from construction excavators to industrial presses. Keeping hydraulic oil clean is critical — contaminants lead to component wear, system failure, and costly downtime. This guide explains what hydraulic filters do, how they work, common types, and how to choose the right replacement for your machines.
A hydraulic filter is a precision component installed in hydraulic circuits to remove solid particles and impurities from hydraulic oil. Contaminants can originate from internal wear (metallic particles), seal degradation, or external sources (dust, rust). Without filtration, pumps, valves, and actuators suffer premature wear and failure.
Common applications: construction equipment, agricultural machinery, forklifts, industrial hydraulic units.
Hydraulic oil flows through a filter media (paper, glass fiber, or wire mesh). The media traps particles while allowing clean oil to pass. Typical flow path:
If the element clogs, many systems include a bypass valve to prevent excessive pressure rises. However, bypass flow is not a substitute for timely element replacement.
Tip: Monitor differential pressure or follow OEM change intervals to avoid bypass operation and downstream damage.
Filters are placed in different locations of a hydraulic circuit — each location has a distinct purpose:
Delaying replacement causes:
Regular filter maintenance preserves equipment uptime and reduces long-term ownership costs.
When selecting a replacement, consider:
For more details on selecting filters by size and micron, see our Hydraulic Filter product page.
The following are commonly requested cross references — CHINA EVERLASTING PARTS supplies OEM-equivalent elements for these part numbers:
| Brand | Part Number (Example) |
|---|---|
| Baldwin | PT9302-MPG |
| Donaldson | P566689 / P170587 |
| Hydac | 0060D010BH / HC 2055960 |
| Parker | PR3066 / PR3066Q |
| MP Filtri | MP9202 |
| Rexroth | R928017119 |
| Wix | D34B200SV / D82E10HV |
If you need help locating an exact replacement, send us the part number — we can confirm cross references and MOQ for OEM orders.
CHINA EVERLASTING PARTS CO., LIMITED is a professional manufacturer of high-quality filters. Our main products include Air Filters, Oil Filters, Fuel Filters, Hydraulic Filters, Fuel Water Separators, Air Oil Separators and filter assemblies. We accept OEM & ODM orders and support global distribution.
Contact Us for OEM or bulk orders:
WhatsApp / Wechat: +86 18965520297 / +86 18144082725
Email: Sales@filters-king.com
Website: www.filters-king.com
Published by CHINA EVERLASTING PARTS CO., LIMITED. For technical support or cross-reference inquiries, please contact our sales team.
